Wide 5 Hubs
Now Speedway Engineering’s Wide 5 Hub is even better.
The drive plate now has 5 bolts. Less weight more strength. This new drive plate is
interchangeable with other manufactures’ 5-bolt hubs and drive plates.Our high-strength, big bearing aluminum Wide 5 hubs are designed to take the punishment of asphalt stock car racing. The solid design maximizes rotational and lateral strength while keeping weight to a minimum.

Features:
> CNC machined and fully inspected in-house
> High quality, heat treated A356 aluminum
> Available with either fine or coarse thread studs
> Bolt-on rotor adapter acts as a heat shield and allows use of all common rotors
> Spoke design allows for large caliper brake packages

Benefits:
> These Wide 5 hubs will not fill up with gear lube!
> Preferred by many championship teams across America!
> Strongest Wide 5 hub available!

Wide 5 Front Hubs Part#
Wide Five Front Hub - assembly, fits Wide Five spindles 7809-10*
Wide Five Front Hub Only - fits Wide Five spindles 7809
Wide 5 front dust cap.
.040" thick Aluminum
122
Hollow aluminum bolt kit for Wide 5 front dust cap 83-041
Floating Rotor Adaptors For Speedway Engineering Wide 5 Hubs
Makes any 8x7” rotor a floating rotor when used with Wilwood Dynamic Mtg. Kit part # 230-6710
 
5306B-W 
Note: Front hub assemblies include: Hub, rotor adaptor, studs, races, bearings, seal, dust cap,
spindle nut, washer & hardware.
Note: Specify fine or coarse thread studs.
Note: Bare hubs include races and studs.
* Specify brake rotor adaptor bolt circle.8 x 7" or 8 x 7-5/8"

Wide 5 Rear Hubs Part#
Wide Five Rear Hub Assembly
fits Wide Five Floater & Quick change
7809-11*
Wide Five Rear Hub Only
fits Wide Five Floater & Quick change
7809
5 Lug Wide 5 drive plate Assembly 792A-2
Bolt kit for 5 lug wide 5 drive plate 83-074
Dust cap for 5 Lug Wide 5 drive plate (792A) 792-5
Gasket for 5 Lug Wide 5 drive plate (792A) 792-5G
Floating Rotor Adaptors For Speedway Engineering Wide 5 Hubs
Makes any 8x7” rotor a floating rotor when used with Wilwood Dynamic Mtg. Kit part # 230-6710
 
5306B-W 
Note: Rear hub assemblies include: Hub, drive plate, rotor adaptor, studs, races, bearings, seal, dust cap, lock nut, washer, o-ring, and bolts.
Note: Specify fine or coarse thread studs.
Note: Bare hubs include races and studs.
* Specify brake rotor adaptor bolt circle.8 x 7" or 8 x 7-5/8"
 

Speedway Engineering 13040 Bradley Ave. Sylmar, Ca. 91342 Phone 818-362-5865 Fax 818-362-5608
All Rights Reserved © Speedway Engineering 2003