Speedway Engineering's Super Max Quick Change Rear Ends

Super Max Quick Change Rear Ends

Super Max Quick Change Rear Ends

Lighter than comparable units on the market, the Quick Change Super Max has a proven track record of outstanding reliability. We reduced the excess unsprung and rotating weight in the Super Max to help improve your lap times! This unit has long been the secret tool for many past and current champions in many forms of racing. Features: > Premium gundrilled axles > Oil cooler, vent, fill, and drain fittings > Aluminurn spool, drive plates, rotor adaptors and dust covers > Steel 5 x 5 or Wide 5 hubs > Ground 3" OD tubes > 4:11 ring and pinion > Accepts 10 Spline change gears > Standard quick change yoke > Heat-treated lower shaft > Includes oil return line kit Benefits: > Rear end pump retrofit kit available > 7 hub assemblies available. > 3 different ring gear carriers available: Aluminum spool, Detroit locker assembly, Black Gold RECOMMENDED APPLICATIONS: Late Model - Goody's Dash - Tour Car
Super Max Quick Changes	Part#
GN 5 on 5" with aluminum hubs and drive plates, hollow axles, rotor adaptors (specify BC)	8500A-1
GN 5 on 5" with steel hubs and drive plates, solid axles	8500A-3
W5 with aluminum hubs and drive plates, back mounted rotor adapters, solid axles, specify Rotor bolt circle and fine or coarse thread studs	8500A-5
Mini stock 4 lug Aluminum hubs and driveplates, hollow axles, rotor adaptors	8500A-9
Mod lite 5x5" Steel hubs, hollow axles, rotor adaptors, 5/8" studs	8500A-14
2 inch bearing 5 on 5" with hubs and drive plates, axles and rotor adaptors (specify BC)	8500A-15
Bald assembly with GN 5 on 5 tubes and snouts	8500B-1
Bald assembly with W5 tubes and snouts	8500B-3
Bald assembly with MS tubes and snouts (Mod Lite, Goodys Dash)	8500B-7
Bald assembly with Howe / Vogel tubes and snouts	8500B-11
Bald assembly with stock Ford type tubes and housing ends - large bearing	8500B-9
Bald Assembly with 2 inch bearing tubes and snouts	8500B-11
Note: Bald assemblies do not include axles, hubs, drive plates, hubs or related parts.
Options	Part#
For Alum. GN drive plates	7050-1
For Alum. Hub less rotor adaptor	7050-2
For special bolt circle on hubs	7050-5
Install truck arm mounts	7050-9
Add front yoke with pulley for oil pump	7050-20
Install caliper bracket for 12206 (Wilwood Superlite)	7050-8-6
Install leaf spring pads	7050-12
For hollow W5 axles	7650-1
Install Alum. Case Detroit Locker	8550-1
Install Watts Link Assy. less links	8550-2L
Install DPI Black Gold Differential	8550-5
Install caliper bracket #12205 (Wilwood Dynalite)	7050-8-5
Add direct drive oil pump	8550-6