Speedway Engineering's Floater Snout ID Chart

Snout Identifier

You can easily identify the type of full floating rear end housing you have if you measure the inner and outer bearing diameters on your snout (the end of the tube on a full floating rear end).
Snout ID	Inner Bearing Dia.	Outer Bearing Dia.
Grand National	2.500"	2.500"
Super Speedway	2.470"	2.250"
Mini Stock/Mod Lite	1.811"	1.811"
Wide Five	1.905"	1.811"
Howe-Vogel	2.038"	2.038"

Note: These sizes are nominal and are only intended to help identify the part you need.