| Item # | Description | Part # |
| 1 | Ring Gear Thrust Adjuster Assembly | 83-023 |
| 2 |
Center Section Thru Bolt Kit | 83-030 |
| 3 |
Side Bell, LH, Incl. Race & Plug | 82-075 |
| 4 |
0-ring, Side Bell to Case | 83-274 |
| 5 |
Seal, Side Bell to Carrier | 83-6090 |
| 6 |
Race, Carrier Bearing | 83-362A |
| 7 |
Bearing Carrier | 83-368 |
| 8 |
Ring Gear Spool, Aluminum, 31 SPL | 7802A |
| NS
|
Detroit Locker Assembly, Aluminum Case 31 SPL | 7804-1 |
| 9 |
Carrier Shim Kit | 83-012 |
| 10 |
Ring & Pinion, 4:11, Bare, LH THD, 9310 | 85-001 |
| 10 |
Ring & Pinion, 4:86, Bare, RH THD, 9310 | 85-002 |
| 11 |
Ring Gear Bolt Kit | 83-005 |
| 12 |
Center Section Case, Bare, Incl. Plugs | 81-072 |
| 13 |
Lower Thru Shaft, Heat Treated | 87-001 |
| 14 |
Front Thru Shaft Bearing | 83-5207ZZ |
| 15 |
Yoke Seal | 83-1042 |
| 16 |
Yoke Flange 0-ring | 83-236 |
| 17 |
Yoke Seal Flange, Bare | 81-001 |
| 18 |
Yoke Flange Bolt Kit | 83-070 |
| 19 |
Yoke, Bare | 86-001 |
| 20 |
Yoke Retaining Bolt & Washers | 83-061 |
| 21 |
Side Bell, RH incl. race & plug | 82-076 |
| 22 |
Axle Tube to Side Bell Bolt Kit (1 side) | 83-048 |
| 23 |
Pinion Nose Support Bearing (dbl. row with snap ring) | 83-5205 |
| 24 |
Rear Thru Shaft Bearing | 83-6207ZZ |
| 25 |
Pinion Bearing Assembly with Spacer | 83-27880 |
| 26 |
Pinion Washer | 83-004 |
| 27 |
Pinion Nut with Set Screws (LH THD) | B3-001 |
| 28 |
Pinion Bearing Retaining Sleeve | 81-007 |
| 29 |
Pinion Bearing Retaining Flange | 81-008 |
| 30 |
Pinion Retaining Flange Bolt Kit | 83-072 |
| 31 |
Rear Cover Bolt Kit | 83-040 |
| 32 |
Rear Cover Assembly, Incl. Bearings, Plugs | 81-082 |
| 32A |
Bearing, Rear Cover P.N. 81-082 | 83-6305 |
| 33 |
Super Cover Assembly, Incl. Bearings, Plugs | 81-084 |
| 33A
|
Bearing, Super Cover P.N. 81-084 | 83-405 |
| 34 |
Change Gears, STD or Super Speedway | CG# |
| 35 |
Plugs, Fill, Level Check & Drain | 3/8 NPT SH |