| Brake Rotor Adaptor Features |
| Speedway Engineering's large selection of brake rotor adaptors allows the use of virtualy all popular brake rotors with our hubs. |
| >
CNC Machined > 6061-T651 Alum (except Mod Lite steel) |
| Brake Rotor Adaptors for Grand National/Wide Five Hubs | Part# | |
 |
8 bolt on 7.0" bolt circle | 5306B-1 |
| 8 bolt on 7.62" bolt circle | 5306B-2 | |
| 10 bolt on 6.8" bolt circle | 5306B-3 | |
| 12 bolt on 6.68" bolt circle | 5306B-4 | |
| Blank - no rotor bolt holes | 5306B-5 | |
| Note: Rotor adaptors listed above fit Speedway Engineering hubs part GN # 5306 (front), 6001A (rear), Mod-Lite 5312A, 5312B and Wide Five. 7809, also Stock Car Products hubs, as well as other manufactures. | ||
|
Floating Brake Rotor Adaptors
For Grand National/Wide Five Hubs) |
Part# | |
 |
Makes any 8x7” rotor a floating rotor when used with Wilwood Dynamic Mtg. Kit part # 230-6710 | 5306B-W |
| Note: Rotor adaptors listed above fit Speedway Engineering hubs part GN # 5306 (front), 6001A (rear), Mod-Lite 5312A, 5312B and Wide Five. 7809, also Stock Car Products hubs, as well as other manufactures. | ||
| Brake Rotor Adaptors for Mini Stock Hubs | Part# | |
 |
6 bolt on 5.5" bolt circle | 5307B |
| 8 bolt on 7.0" bolt circle | 5307B-1 | |
| 8 bolt on 7.62" bolt circle | 5307B-2 | |
| 10 bolt on 6.8" bolt circle | 5307B-3 | |
| 12 bolt on 6.68" bolt circle | 5307B-4 | |
| Blank - no rotor bolt holes | 5307B-5 | |
| Note: Rotor adaptors listed above fit Speedway Engineering mini stock hubs, 5307-1, 5307-2 (front), 5310A, 5310B (rear). | ||
| Brake Rotor Adaptors for Mod-Lite Hubs | Part# | |
 |
Mod Lite rotor adaptor Steel (IMCA) | 5306B-7 |
| Mod
Lite rotor adaptor Aluminum (Goodys Dash, Late Model) |
5306B-7A | |
| Brake Rotor Adaptors for 2 inch Bearing Hubs (Howe/Vogle) | Part# | |
 |
8 bolt on 7.0" bolt circle | 5316B-1 |
| 8 bolt on 7.62" bolt circle | 5316B-2 | |
| Floating Brake Rotor Adaptors For 2 inch Bearing Hubs (Howe/Vogle) | Part# | |
 |
For
front hub with 12 3/16” dia. Performance friction 1 1/4" rotor |
5316-PF |
| For
front hub with 11 3/4” dia. Performance friction 1 1/4" rotor |
5318-PF |
|
| Makes
any 8x7” rotor a floating rotor when used with Wilwood Dynamic Mtg. Kit part # 230-6710 |
5318-W |
|
Speedway
Engineering 13040 Bradley Ave. Sylmar, Ca. 91342 Phone 818-362-5865 Fax
818-362-5608
All
Rights Reserved © Speedway Engineering 2003