| Mini Stock Quick Change Rear Ends |
 |
| The
champion's choice, this specifically engineered unit is for smaller,
lighter racecars. The Mini Stock Quick Change is the smaller version
of our best-selling Super Max.
Features: Benefits: RECOMMENDED APPLICATIONS: |
|
| Mini Stock Quick Changes | Part# |
| Baby Grand Assembly - 4 on 4-1/4", 1/2" studs | 8100C-1 |
| Baby Grand Assembly - 4 on 4-1/2", 1/2" studs | 8100C-2 |
| Mod Lite Assembly, 5 on 5", 5/8" studs | 8100C-3 |
| Wide
5 Assembly, includes rotor adpaptors, specify rotor bolt circle and fine or coarse thread studs |
8100B-2 |
| Bald assembly with Mini Stock / Mod Lite snouts | 8100A-1 |
| Bald assembly with Wide 5 snouts | 8100A-2 |
| Bald assembly with stock Ford type tubes and housing ends, large bearing | 8100A-4 |
| Note:
Complete Assembly includes: aluminum hubs, rotor adaptors ( 6 on 5-1/2"
BC ), drive plates, aluminum dust caps, axles, hub bearings, seals,
wheel studs and all required hardware. Note: Bald assemblies do not include axles, hubs, bearings, seals, drive plate or related parts. |
|
| Options | Part# |
| Replace spool w/alum. Detroit Locker | 8150-2 |
| Rotor adaptors 6 on 5 1/2" bolt circle | 8150-3 |
| Rotor adaptors 8 on 7" bolt circle | 8150-3-1 |
| Rotor adaptors 8 on 7.62" bolt circle | 8150-3-2 |
| Caliper bracket # 12203 | 7050-8-3 |
| Caliper bracket # 12204 for solid rotor | 7050-8-4S |
| Caliper bracket # 12204 for vented rotor | 7050-8-4V |
| Caliper bracket # 12205 | 7050-8-5 |
| Caliper bracket # 12206 | 7050-8-6 |
| Watts linkage less links | 8150-11 |
| Leaf spring pads (#7007) | 7050-12 |
| Oil cooler ports | 8150-4 |
| Special bolt circle (4 lug hubs) | 7150-1 |
| Long studs 1/2-20 x 3.65 (4 lug hubs) | 7150-6 |
| 5/8-18 x 2.9" Studs (4 lug hubs) | 7150-7 |
| Top three point mount | 7003-6 |
| Rear Cover Pump | 8150-5 |
Speedway
Engineering 13040 Bradley Ave. Sylmar, Ca. 91342 Phone 818-362-5865 Fax
818-362-5608
All
Rights Reserved © Speedway Engineering 2003