Hot Rod Rear Ends / Sway bars
The Super Max

The Today Version of the Nostalgic V-8 Halibrand
>Perfect for heavier vehicles that have power to burn
>Designed strong and tough for racing, yet is lightweight
>Can be built to your special width requirements
>"Quick change" gears provide complete gear ratio flexibility. One gear set included with each assembly

Quick Changes / Options Part #
SMQC street rod assembly, includes ford large bearing flanged tubes and 31 spline axles, open 4 spider carrier, 4:11 ring and pinion,1 gear set, satin "as cast" finish. specify bolt circle and wheel register size. 8500A-SR
Option-add poisitraction carrier 8550-8
Option-Polished center with billet rear cover 8550-9

The Mini Stock

The perfect size for your '32 High Boy or '26-'27 T-Bucket
>Smaller yet has all the same great engineering attributes as the Super Max
>Race proven at Bonneville at over 300 MPH !
>Can be built to your special width requirements

Quick Changes / Options Part #
MSQC street rod assembly, includes ford large bearing flanged tubes and 28 spline axles, open 4 spider carrier, 4:11 ring and pinion,1 gear set, satin "as cast" finish. specify bolt circle and wheel register size. 8100A-SR
Option-add Detroit locker carrier 8150-2
Option-Polished center with billet rear cover 8150-9

9" Ford

Heavy Duty Nascar-Style Center Hits the Street
>Great for the high performance muscle car that demands the best
>Authentic Nascar centers with billet axle bearing flanges and "No-Flex" Tubes
>Built with large bearing or Torino-style flanges to any width

Housing Part #
Ford 9" housing, street rod style, with axles 70102SR
Ford 9" housing, street rod style, less axles 7010SR

Hot Rod Quick Change Covers

Customize your Quick Change with your choice of Rear covers
>The "Finned Billet" cover is a high grade, highly polished eye-catcher. Sure to win "'Peoples Choice Award!" (Included with all polished quick changes)
>The polished cast cover has the clean original look

Covers Part #
SuperMax polished finned cover 81-028F
SuperMax standard "as cast" rear cover 81-028P
Mini Stock polished finned cover 81-025F
Mini Stock standard "as cast" rear cover 81-025P

Sway Bars

The Speedway Engineering 3-piece sway bar set up is used by more Street Rod builders than ever before
>More turning stability for your street rod than any "stock bar" set up
>Our hugh selection of sway bars and arms can fit almost any suspension, front or rear
>installation and adjustment are easy
>Affordable
Click here for more information about our sway bars

 

 

Speedway Engineering 13040 Bradley Ave. Sylmar, Ca. 91342 Phone 818-362-5865 Fax 818-362-5608
All Rights Reserved © Speedway Engineering 2003