| Tech
Section |
| Setting Axle End play on a Full Floating Rear Axle Housing - The most important thing you need to do when you are installing your axles in a floater is setting the axle endplay. |
| Axle Identifier - Many customers find it difficult to identify the axle they are trying to replace. The Axle Identifier helps you determine your axle by measuring the seal area diameter and length. |
| Gear Chart - A quick change gear chart for 10 spline and 6 spline gears. |
| Mini Stock SuperMax Stock Car Exploded parts views for Quick change rear ends. |
| Mini Stock SuperMax Stock Car Quick Change rear end torque specs |
| Rear End Measurement Page - A detailed listing of measuring specifications for rear end dimensions. |
| Rear End Ordering Information - A description of how to determine the width, pinion location, mounts and hub offsets. |
| Snout Identifier - By measuring the bearing diameters on your present rear end you can determine the type of housing, axle or hub you need. |
| Stud Hole Chart - A chart to help you make sure that the stud hole is sized correctly. We include the hole sizes for our most popular studs. |
Sway
Bar Rate Charts
- Here you will find rate charts for our sway bars. You can compare
the rates of our bars by diameter and swaybar arm length. |
Speedway
Engineering 13040 Bradley Ave. Sylmar, Ca. 91342 Phone 818-362-5865 Fax
818-362-5608
All
Rights Reserved © Speedway Engineering 2003