| Aluminum Sway Bar Arms | |
| 610-3-49 | |
| Aluminum straight 1"-48 spline | 610-1 |
| Aluminum, straight 1 1/4"-48 spline | 610-3 |
| Aluminum, straight 1 1/4"-49 spline | 610-3-49 |
| 615 | |
| Aluminum, straight 7/8"-48 spline | 614 |
| Aluminum, straight 5/8"-36 spline | 615 |
| Aluminum, straight 3/4"-48 spline | 616 |
| Note: 48 / 49 spline arms are 17" OAL, 5/8" and 3/4" arms are 15" OAL | |
| Straight Steel Sway Bar Arms | |
| 613-3-49 | |
| Steel, straight 1"-48 spline | 613-1 |
| Steel, straight 1 1/4"-48 spline | 613-3 |
| Steel, straight 1 1/4"-49 spline | 613-3-49 |
Steel, straight 1 1/2" -48 spline |
613-4 |
| Note: 48 / 49 spline arms are 17" OAL, 5/8" and 3/4" arms are 15" OAL | |
| 15 degree Steel Sway Bar Arms | |
|
618-4L |
|
| Steel, 15 deg. 1 1/2" 49-spline | 618-4 |
| Steel, 15 deg. 1-1/4" 49-spline arms | 618-3-49 |
| Note: 48 / 49 spline arms are 17" OAL, 5/8" and 3/4" arms are 15" OAL | |
| 30 degree Steel Sway Bar Arms | |
| 617-3-49 | |
| Steel, 30 deg.1"-48 spline | 617-1 |
| Steel, 30 deg.1 1/4"-48 spline | 617-3 |
| Steel 1-1/2" -48 spline | 617-4 |
| Steel, 30 deg.1 1/4"-49 spline | 617-3-49 |
| Note: 48 / 49 spline arms are 17" OAL, 5/8" and 3/4" arms are 15" OAL | |
| 1 ¾”-48 spline Sway Bar Arms | |
 613-5-1 |
 613-5 |
| > 4130
steel > Fully CNC machined > Precision broached and timed They are available pre-bent and heat treated with a 3 ¼” offset ( see picture below ) or you can buy them unbent, bend them yourself and have them heat-treated locally. |
|
 |
|
| Unbent (not heat-treated) | 613-5 |
| Pre-bent heat-treated (Sold in Pairs) | 613-5-1 |
| Sway Bar Hardware | |||
 1/2 JNL / R |
 1201 |
 1212RF |
 1212LM / RM |
 605B-100 / 605B-125S |
 605B-125 |
 605C-100/125/75/62 |
 605A |
| Rod end, male, 1/2-20, RH | 1212RM |
| Rod end, male, 1/2-20, LH | 1212LM |
| Rod end, female, 1/2-20, RH | 1212RF |
| Hex link, 1/2-20 RH & LH Thread, 3/4 Hex x 2 1/2" long | 1201 |
| Jam nut, 1/2-20 RH | 1/2 JNR |
| Jam nut, 1/2-20 LH | 1/2 JNL |
| Pillow block, bronze bushing, 1" | 605B-100 |
| Pillow block, bronze bushing, 1-1/4" ( Low Profile ) | 605B-125S |
| Pillow block, bronze bushing, 1-1/4" | 605B-125 |
| Locating collar, 5/8" | 605C-62 |
| Locating collar, 3/4" | 605C-75 |
| Locating collar, 1" | 605C-100 |
| Locating collar, 1 1/4" | 605C-125 |
| Plastic bushing, 1" | 605A-100 |
| Plastic bushing, 1 ¼" | 605A-125 |
Speedway
Engineering 13040 Bradley Ave. Sylmar, Ca. 91342 Phone 818-362-5865 Fax
818-362-5608
All
Rights Reserved © Speedway Engineering 2003