Speedway Engineering's Super Speedway Floater Housing Options

Super Speedway Floater Housing Options

Click here to download the new Super Speedway housing order form
Speedway Engineering’s lightweight Super Speedway housing has all the strength, quality and consistency you have come to expect from Speedway Engineering and it can weigh as little as 51 lbs. With the addition of new brake bracket, truck arm mount, sway bar mount and fitting options you can order of complete housing ready to use. Now you no longer need to order a housing, add tabs, mounts and check it for straightness before you can use it. You can order the housing the way you want it, ready to use. Speedway Engineering manufactures the most accurate floater housings avalable. We guarantee plus or minus .003” on the toe and .03 of a degree in camber. Every floater housing is shipped with a spec sheet that includes camber, toe, width, pinion offset and pinion angle.
	Brake Brackets	Option #
	5/16” thick solid 180 degree mounting	7050-1090
	5/16” thick with lightning holes 360 degree mounting	7050-1091
	5/16” thick with lightning holes 180 degree mounting	7050-1092
	3/8” thick solid 360 degree mounting	7050-1093
	3/8” thick solid 180 degree mounting	7050-1094
	3/8” thick with lightning holes 360 degree mounting	7050-1095
	3/8” thick with lightning holes 180 degree mounting	7050-1096
	Oil Return Bungs	Option #
	-8 weld on Oil return fitting	7050-2251
	-10 weld on Oil return fitting	7050-2252
	Weld on Fittings	Option #
	-6 weld on fitting	7050-2034
	-8 weld on fitting	7050-2035
	-10 weld on fitting	7050-2036
	Vent Bungs	Option #
	-6 weld on vent fitting	7050-2150
	-8 weld on vent fitting	7050-2151
	-10 weld on vent fitting	7050-2152
	1/2" NPT(F) vent fitting	7050-2153
	3/4" NPT(F) vent fitting	7050-2154
	Jack Point / Heater Bungs	Option #
	Jack point	7050-9032
	-8 weld on Heater Bung	7050-2351
	-10 weld on Heater Bung	7050-2352
	1/2" NPT(F) Heater Bung	7050-2353
	Sway Bar Mounts	Option #
	Single shear 1/8" thick material 3/8" bolt hole	7050-7160
	Single shear 1/4" thick material 3/8" bolt hole	7050-7161
	Single shear 1/4" thick material 3/8"-24 hole	7050-7162
	Customer supplied sway bar mount	7050-7165
	Double shear 1/8" thick material 3/8" bolt hole	7050-7163
	Double shear 1/8" thick material with spacers	7050-7164
	Strut Tabs	Option #
	Double shear 1/8" thick material 3/8" bolt hole	7050-7271
	Single shear 1/8" thick material 3/8" bolt hole	7050-7270
	Truck Arm Pads	Option #
	Standard Super speedway floater 7ga.	7050-6109
	Super speedway floater Narrow 10ga.	7050-6110
	Super speedway floater Narrow 7ga.	7050-6111
	Misc. Options	Option #
	U bolt strap	7050-9072
	Vent baffle	7050-9071
	Snap rings to retain inner axle tube seals	7050-8036