| >Dimensions
shown on the chart are for 60" hub face to hub face rear ends. This
applies to all the different types listed. |
| >"G"
& "H" dimensions shown are for Speedway Engineering hubs and are for
reference only. When ordering a "W5" type rear end, using other than
Speedway Engineering hubs, you must specify the hub brand and type
or the "H" dimension. Rear end drawings are only to be considered
representative of the assemblies listed |
| >Hub
abbreviations on chart are : "GN" is Grand National, "SS" is Super
Speedway, W5 is Wide 5, "MS" is Mini Stock. |
| >Axle
length shown here are actual end to end and do not include adjuster
bolts or plugs. |
|
