Speedway Engineering's Quick Change Center Sections

Loaded Centers / 01 Kits / 02 Kits

Loaded Center		4:11 Gear Ratio	4:86 Gear Ratio
	Mini Stock center	8108-1	N/A
	Super Max center	8508-1	N/A
	Stock Car center (Champ)	7808-1	7808-2
Note: Loaded center sections have the through shaft and pinion installed. Pinion depth and pre-load are set. Yoke, retaining flange with seal, and standard rear cover are included. The ring gear carrier is not included (spool or locker).

01 Kits		4:11 Gear Ratio
	Super Max	SM-01-1
	Mini Stock	MS-01-1

Note:0-1 kits include a loaded center section, side bells, ring and pinion,ring gear bolts, bearings,seals and O-rings. 0-1 kits do not include the ring gear carrier (spool or locker)

02 Kits		4:11 Gear Ratio
	Super Max	SM-02-1
	Mini Stock	MS-02-1

Note: 0-2 kits are the same as 0-1 kits exsept they include a spool installed with the ring and pinion setup. Side bell seals are not installed so they can be installed after the tube installation.